Products
Starbar® Silicon Carbide
SiC Heating Elements Starbar Engineering
Literature

Igniter Systems

I Squared R Element Co
Starbar® & Moly-D® Heating Elements > Starbar Silicon Carbide SiC Heating Elements > Starbar Silicon Carbide Heating Element Accessories > Terminal Gasket Assemblies > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Terminal Gasket Assemblies

 
Check up to five results to perform an action.

The TGA consists of two ceramic fiber washers, one steel washer, and a spring.

The TGA is used as an alternative to packing ceramic fiber insulation around the Starbar cold end. Ceramic fiber insulation is often used at the cold face of the furnace to help reduce furnace energy losses.

There are advantages to using the TGA rather than packing ceramic fiber insulation around the Starbar. Because the TGA is spring-loaded it allows the Starbar freedom of movement. If ceramic fiber is packed too tightly it can cause tremendous physical stresses to be exerted to the Starbars, possibly leading to failures due to breakage. Freedom of movement is important because there is movement between the Starbars and the furnace walls created by different thermal expansion rates.

Installing of TGA is also quicker than packing with ceramic fiber.

Neither of these methods are intended to be an atmosphere seal. It is to help reduce radiant energy losses, and to a smaller degree some convection heat losses.

There are two free spring lengths, 1 inch (25 mm) and 3 inches (75 mm). The last digit of the part number is used to call out the free spring length.



Compare Items
   
  Results 1 - 25 of 78 1 2 3 4 

Item #

Item Name

Starbar Diameter

Steel Washer ID

Steel Washer OD

Ceramic Fiber Washer ID

Ceramic Fiber Washer OD

Free Spring Length
TGA-10-1 Terminal Gasket Assembly 0.38 Inch
10 mm 		0.44 Inch
11 mm 		1.00 Inch
25 mm 		0.38 Inch
9.5 mm 		1.25 Inch
32 mm 		1 Inch
25 mm
TGA-11-1 Terminal Gasket Assembly 0.44 Inch
11 mm 		0.50 Inch
13 mm 		1.25 Inch
32 mm 		0.44 Inch
11 mm 		1.50 Inch
38 mm 		1 Inch
25 mm
TGA-13-1 Terminal Gasket Assembly 0.50 Inch
13 mm 		0.56 Inch
14 mm 		1.25 Inch
32 mm 		0.50 Inch
13 mm 		1.50 Inch
38 mm 		1 Inch
25 mm
TGA-16-1 Terminal Gasket Assembly 0.63 Inch
16 mm 		0.65 Inch
17 mm 		1.38 Inch
35 mm 		0.63 Inch
16 mm 		1.88 Inch
45 mm 		1 Inch
25 mm
TGA-19-1 Terminal Gasket Assembly 0.75 Inch
19 mm 		0.78 Inch
20 mm 		1.50 Inch
38 mm 		0.75 Inch
19 mm 		2.00 Inch
51 mm 		1 Inch
25 mm
TGA-25-1 Terminal Gasket Assembly 1.00 Inch
25 mm 		1.06 Inch
27 mm 		2.00 Inch
51 mm 		1.00 Inch
25 mm 		2.50 Inch
64 mm 		1 Inch
25 mm
TGA-32-1 Terminal Gasket Assembly 1.25 Inch
32 mm 		1.31 Inch
33 mm 		2.75 Inch
70 mm 		1.18 Inch
30 mm 		3.25 Inch
83 mm 		1 Inch
25 mm
TGA-35-1 Terminal Gasket Assembly 1.38 Inch
35 mm 		1.44 Inch
36 mm 		2.75 Inch
70 mm 		1.38 Inch
35 mm 		3.25 Inch
83 mm 		1 Inch
25 mm
TGA-38-1 Terminal Gasket Assembly 1.50 Inch
38 mm 		1.56 Inch
40 mm 		2.75 Inch
70 mm 		1.44 Inch
37 mm 		3.25 Inch
83 mm 		1 Inch
25 mm
TGA-44-1 Terminal Gasket Assembly 1.75 Inch
44 mm 		1.88 Inch
47 mm 		3.25 Inch
83 mm 		1.69 Inch
43 mm 		3.75 Inch
95 mm 		1 Inch
25 mm
TGA-54-1 Terminal Gasket Assembly 2.12 Inch
54 mm 		2.22 Inch
56 mm 		3.50 Inch
89 mm 		2.00 Inch
51 mm 		4.00 Inch
101 mm 		1 Inch
25 mm
TGA-64-1 Terminal Gasket Assembly 2.50 Inch
64 mm 		2.50 Inch
63 mm 		4.12 Inch
105 mm 		2.50 Inch
63 mm 		4.50 Inch
114 mm 		1 Inch
25 mm
TGA-70-1 Terminal Gasket Assembly 2.75 Inch
70 mm 		2.88 Inch
73 mm 		4.12 Inch
105 mm 		2.75 Inch
70 mm 		4.50 Inch
114 mm 		1 Inch
25 mm
TGA-10-3 Terminal Gasket Assembly 0.38 Inch
10 mm 		0.44 Inch
11 mm 		1.00 Inch
25 mm 		0.38 Inch
9.5 mm 		1.25 Inch
32 mm 		3 Inch
75 mm
TGA-11-3 Terminal Gasket Assembly 0.44 Inch
11 mm 		0.50 Inch
13 mm 		1.25 Inch
32 mm 		0.44 Inch
11 mm 		1.50 Inch
38 mm 		3 Inch
75 mm
TGA-13-3 Terminal Gasket Assembly 0.50 Inch
13 mm 		0.56 Inch
14 mm 		1.25 Inch
32 mm 		0.50 Inch
13 mm 		1.50 Inch
38 mm 		3 Inch
75 mm
TGA-16-3 Terminal Gasket Assembly 0.63 Inch
16 mm 		0.65 Inch
17 mm 		1.38 Inch
35 mm 		0.63 Inch
16 mm 		1.88 Inch
45 mm 		3 Inch
75 mm
TGA-19-3 Terminal Gasket Assembly 0.75 Inch
19 mm 		0.78 Inch
20 mm 		1.50 Inch
38 mm 		0.75 Inch
19 mm 		2.00 Inch
51 mm 		3 Inch
75 mm
TGA-25-3 Terminal Gasket Assembly 1.00 Inch
25 mm 		1.06 Inch
27 mm 		2.00 Inch
51 mm 		1.00 Inch
25 mm 		2.50 Inch
64 mm 		3 Inch
75 mm
TGA-32-3 Terminal Gasket Assembly 1.25 Inch
32 mm 		1.31 Inch
33 mm 		2.75 Inch
70 mm 		1.18 Inch
30 mm 		3.25 Inch
83 mm 		3 Inch
75 mm
TGA-35-3 Terminal Gasket Assembly 1.38 Inch
35 mm 		1.44 Inch
36 mm 		2.75 Inch
70 mm 		1.38 Inch
35 mm 		3.25 Inch
83 mm 		3 Inch
75 mm
TGA-38-3 Terminal Gasket Assembly 1.50 Inch
38 mm 		1.56 Inch
40 mm 		2.75 Inch
70 mm 		1.44 Inch
37 mm 		3.25 Inch
83 mm 		3 Inch
75 mm
TGA-44-3 Terminal Gasket Assembly 1.75 Inch
44 mm 		1.88 Inch
47 mm 		3.25 Inch
83 mm 		1.69 Inch
43 mm 		3.75 Inch
95 mm 		3 Inch
75 mm
TGA-54-3 Terminal Gasket Assembly 2.12 Inch
54 mm 		2.22 Inch
56 mm 		3.50 Inch
89 mm 		2.00 Inch
51 mm 		4.00 Inch
101 mm 		3 Inch
75 mm
TGA-64-3 Terminal Gasket Assembly 2.50 Inch
64 mm 		2.50 Inch
63 mm 		4.12 Inch
105 mm 		2.50 Inch
63 mm 		4.50 Inch
114 mm 		3 Inch
75 mm
  Results 1 - 25 of 78 1 2 3 4 
Site created by Thomas Web Solutions and powered by Navigator Platform
I Squared R. Element Co., Inc. | Over 40 years experience in the heating element business