Products
Igniter Systems

I Squared R Element Co
Starbar® & Moly-D® Heating Elements > Moly-D Molybdenum Disilicide MoSi2 Heating Elements > Moly-D Molybdenum Disilicide Heating Element Accessories > Plate Holders > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Plate Holders

Check up to five results to perform an action.

Element Sizes 3/6, 4/9, and 6/12:
Held in place by a hex nut and slotted head machine screw, the plate holder consists of two ceramic plates, two pieces of ceramic fiber paper and a piece of high-temperature ceramic fiberboard. This fiberboard, referred to as a tab, is located between the ceramic plates. The length of the tab varies depending on the thickness of the furnace roof.

The insulating tab fills the opening from the top of the ceramic plates to the hot face of the furnace chamber. The tab seals and reduces the heat losses between the two element legs.

The main advantage of the plate holder is that the Moly-D elements can be installed from the outside of the furnace.

The plate holder can also be supported without the tab extending below the two plates. The "LL" dimension being zero. In this case, the furnace insulation should have two holes rather than a slot.




Compare Items
   
  Results 1 - 10 of 10 1 

Item #

Moly D Le/Lu Diameter

Element Spacing (A)

Plate Width (B)

Tab Width (C)

Tab Thickness (D)

Overall Thickness (E)

item-1015 3/6 20 mm 31.5 mm 14 mm 6 mm 23 mm
item-1016 3/6 25 mm 36.6 mm 19 mm 6 mm 23 mm
item-1017 3/6 40 mm 51.8 mm 34 mm 6 mm 23 mm
item-1018 4/9 20 mm 39.6 mm 11 mm 9 mm 26 mm
item-1019 4/9 25 mm 39.6 mm 16 mm 9 mm 26 mm
item-1020 4/9 40 mm 54.9 mm 31 mm 9 mm 26 mm
item-1021 6/12 40 mm 58.4 mm 28 mm 12 mm 34 mm
item-1022 6/12 50 mm 68.3 mm 38 mm 12 mm 34 mm
item-1023 6/12 55 mm 78.5 mm 43 mm 12 mm 34 mm
item-1024 6/12 60 mm 78.5 mm 48 mm 12 mm 34 mm
  Results 1 - 10 of 10 1 
Site created by Thomas Web Solutions and powered by Navigator Platform
I Squared R. Element Co., Inc. | Over 40 years experience in the heating element business