Products
Igniter Systems

I Squared R Element Co
Starbar® & Moly-D® Heating Elements > Starbar Silicon Carbide SiC Heating Elements > Starbar Silicon Carbide Heating Element Accessories > Terminal Clamps > Item # T-90  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # T-90, Expansion Tool



These tools are used for installation and removal of the T type clamps. Besides the standard in-line type there are two special types, a RA right angle and extended in-line type.




Specifications  · Tables and Charts

Specifications

Identification

The stainless steel clamps are stamped with a number for easy identification and proper matching to the correct diameter Starbars. The expansion tools have the part numbers marked on the handle.

Availability

Most sizes are available from stock. Others can be shipped in one week, or quicker for emergencies.

Terminal Clamp

M-10, M - Type Terminal Clamp
M-11/13, M - Type Terminal Clamp
M-11/13, M - Type Terminal Clamp
M-16, M - Type Terminal Clamp
M-19, M - Type Terminal Clamp
M-25, M - Type Terminal Clamp
T-10, T - Type Terminal Clamp
T-11/13, T - Type Terminal Clamp
T-11/13, T - Type Terminal Clamp
T-16, T - Type Terminal Clamp
T-19, T - Type Terminal Clamp
T-25, T - Type Terminal Clamp

Note

The T-100+5 is an extended tool that can be used as a substitute for the T-100. An extended tool is not available for the T-90.
The T-RA (right angle tool) can be used on any of the T-type clamps.


Tables and Charts

Terminal Clamps

Starbar Diameter M - Type Terminal Clamps T - Type Terminal Clamps *Tool
(M) Part Number Inside Diameter Width Distance Between Wings (T) Part Number Inside Diameter Width
MM Inch P/N MM Inch MM Inch MM Inch P/N MM Inch MM Inch P/N
7 0.25 M-07 7 0.25 13 0.50 32 1.25 N/A          
10 0.38 M-10 10 0.40 13 0.50 34 1.30 T-10 11 0.40 13 0.50 T-90
11 0.44 M-11/13 13 0.50 13 0.50 37 1.50 T-11/13 13 0.50 13 0.50 T-90
13 0.50 M-11/13 13 0.50 13 0.50 37 1.50 T-11/13 13 0.50 13 0.50 T-90
16 0.63 M-16 16 0.65 13 0.50 56 2.20 T-16 16 0.65 13 0.50 T-90
19 0.75 M-19 19 0.75 19 0.75 58 2.30 T-19 19 0.75 19 0.75 T-90
25 1.00 M-25 25 1.00 25 1.00 77 3.00 T-25 25 1.00 25 1.00 T-90
32 1.25 M-32 30 1.20 32 1.25 81 3.20 T-32 30 1.20 32 1.25 T-100
35 1.38 M-35/38 35 1.40 32 1.25 97 3.80 T-35/38 35 1.40 32 1.25 T-100
38 1.50 M-35/38 35 1.40 32 1.25 97 3.80 T-35/38 35 1.40 32 1.25 T-100
44 1.75 M-44 40 1.60 38 1.50 118 4.60 T-44 40 1.60 38 1.50 T-100
54 2.12 M-54 51 2.00 38 1.50 114 4.50 T-54 51 2.00 38 1.50 T-100
70 2.75 N/A N/A N/A N/A N/A N/A N/A T-70 63 2.50 38 1.50 T-110
The T-100+5 is an extended tool that can be used as a substitute for the T-100. An extended tool is not available for the T-90.
*The T-RA (right angle tool) can be used on any of the T-type clamps.


Site created by Thomas Web Solutions and powered by Navigator Platform
I Squared R. Element Co., Inc. | Over 40 years experience in the heating element business