Products
Email Us

I Squared R Element Co
Starbar® & Moly-D® Heating Elements > Starbar Silicon Carbide SiC Heating Elements > Starbar Silicon Carbide Heating Element Accessories > Terminal Clamps > Item # T-11/13  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # T-11/13, T - Type Terminal Clamp



The terminal clamps are used to hold the aluminum straps in compression around the circumference of the Starbars. The aluminum strap and terminal clamp should be installed at the very end of the Starbar. There are two types of clamps:
  • "T" - which is used with an expansion tool.
The T type clamp is useful for installations where space is limited.





Specifications  · Tables and Charts

Specifications

Starbar Diameter

0.44 Inch
11
mm

Inside Diameter

0.50 Inch
13
mm

Width

0.50 Inch
13
mm

Temperature Limitation

Clamps are made from heat resistant steel and should never be operated in an ambient temperature over 500ºF (260ºC).

Identification

The stainless steel clamps are stamped with a number for easy identification and proper matching to the correct diameter Starbars. The expansion tools have the part numbers marked on the handle.

Availability

Most sizes are available from stock. Others can be shipped in one week, or quicker for emergencies.

Expansion Tool

T-90, Expansion Tool

Note

The T-100+5 is an extended tool that can be used as a substitute for the T-100. An extended tool is not available for the T-90.


Tables and Charts

Terminal Clamps

Starbar Diameter M - Type Terminal Clamps T - Type Terminal Clamps *Tool
(M) Part Number Inside Diameter Width Distance Between Wings (T) Part Number Inside Diameter Width
MM Inch P/N MM Inch MM Inch MM Inch P/N MM Inch MM Inch P/N
7 0.25 M-07 7 0.25 13 0.50 32 1.25 N/A          
10 0.38 M-10 10 0.40 13 0.50 34 1.30 T-10 11 0.40 13 0.50 T-90
11 0.44 M-11/13 13 0.50 13 0.50 37 1.50 T-11/13 13 0.50 13 0.50 T-90
13 0.50 M-11/13 13 0.50 13 0.50 37 1.50 T-11/13 13 0.50 13 0.50 T-90
16 0.63 M-16 16 0.65 13 0.50 56 2.20 T-16 16 0.65 13 0.50 T-90
19 0.75 M-19 19 0.75 19 0.75 58 2.30 T-19 19 0.75 19 0.75 T-90
25 1.00 M-25 25 1.00 25 1.00 77 3.00 T-25 25 1.00 25 1.00 T-90
32 1.25 M-32 30 1.20 32 1.25 81 3.20 T-32 30 1.20 32 1.25 T-100
35 1.38 M-35/38 35 1.40 32 1.25 97 3.80 T-35/38 35 1.40 32 1.25 T-100
38 1.50 M-35/38 35 1.40 32 1.25 97 3.80 T-35/38 35 1.40 32 1.25 T-100
44 1.75 M-44 40 1.60 38 1.50 118 4.60 T-44 40 1.60 38 1.50 T-100
54 2.12 M-54 51 2.00 38 1.50 114 4.50 T-54 51 2.00 38 1.50 T-100
70 2.75 N/A N/A N/A N/A N/A N/A N/A T-70 63 2.50 38 1.50 T-110
The T-100+5 is an extended tool that can be used as a substitute for the T-100. An extended tool is not available for the T-90.
*The T-RA (right angle tool) can be used on any of the T-type clamps.


Site created by Thomas Web Solutions and powered by Navigator Platform
I Squared R. Element Co., Inc. | Over 40 years experience in the heating element business