Products
Email Us

I Squared R Element Co
Starbar® & Moly-D® Heating Elements > Starbar Silicon Carbide SiC Heating Elements > Starbar Silicon Carbide Heating Element Accessories > D - Type Clamps > Item # D-76  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # D-76, D - Type Clamp



Clamp Strap Combination:
The "D" type clamp strap does not require an additional clamp. It is secured around the circumference of the Starbar by the use of a bolt. The strap connection must be flexible so that no physical stress is transmitted to the Starbars. Avoid using large gauge, heavy wire.





Specifications  · Tables and Charts

Specifications

Starbar Diameter

3.00 Inch
76
mm

Width

2 Inch
51
mm

Rated Current

200 Amp

Hole Diameter

0.55 Inch
14
mm

Identification

Some of the D-clamps are stamped with two part numbers. The number on the clamp’s end identifies the element diameter in mm. The number on the opposite end is the working length in inches.

Ordering Specifications

When ordering D type straps for Starbar diameter 13 mm (0.50 inch) to 32 mm (1.25 inch) specify the standard D-clamp or optional D-clamp with a long lead. The working length, measured from the center of the Starbar to the center of the hole in binding post, is used to determine the length of the long lead. The 35 mm (1.38 inch) to 76 mm (3.00 inch) Starbar has two 100 amp aluminum braided straps held together by a common end clip. When ordering, specify the working length; minimum is 152 mm (6 inch).

Availability

Most sizes are available from stock. Others can be shipped in one week, or quicker for emergencies.


Tables and Charts

D-Type Clamps

D - Type Clamps
Starbar Diameter Part Number Width Rated Current Hole Diameter
MM Inch P/N P/N Long Lead MM Inch Amperage MM Inch
13 0.50 D-13 WL=XX 24 0.95 50 10 0.41
16 0.63 D-16 WL=XX 24 0.95 50 10 0.41
19 0.75 D-19 WL=XX 24 0.95 50 10 0.41
25 1.00 D-25 WL=XX 24 0.95 100 14 0.55
28 1.10 D-28 WL=XX 24 0.95 75 10 0.41
32 1.25 D-32 WL=XX 24 0.95 100 14 0.55
35 1.38 D-35 WL=XX 51 2 200 14 0.55
38 1.50 D-38 WL=XX 51 2 200 14 0.55
44 1.75 D-44 WL=XX 51 2 200 14 0.55
50 2.00 D-50 WL=XX 51 2 200 14 0.55
54 2.12 D-54 WL=XX 51 2 200 14 0.55
64 2.50 D-64 WL=XX 51 2 200 14 0.55
70 2.75 D-70 WL=XX 51 2 200 14 0.55
76 3.00 D-76 WL=XX 51 2 200 14 0.55


Site created by Thomas Web Solutions and powered by Navigator Platform
I Squared R. Element Co., Inc. | Over 40 years experience in the heating element business