Starbar® Silicon Carbide
SiC Heating Elements
Moly-D Molybdenum Disilicide
MoSi2 Heating Elements
Starbar® & Moly-D® Heating Elements
Starbar Silicon Carbide SiC Heating Elements
Type TW Silicon Carbide Heating Elements
Item # TW-1-25
Email This Page
Save To Favorites
Item # TW-1-25, Type TW Silicon Carbide Heating Element
The Starbar TW element is a higher density element, used in severe applications such as corrosive atmospheres or where normal RR type elements do not provide acceptable service life. The TW element has a typical density 10 to 12% higher than normal RR elements. This higher density results in slower oxidation and aging, which yields longer element life. The dimensions and electrical properties of the TW element are similar to those of the RR element, therefore, a TW element may be interchanged directly for an RR element. The TW element due to its higher density may be more prone to thermal shock during installation into hot furnaces. Special care should be used not to thermal shock new elements during installation and heat up.
TW Starbars are described by giving the overall length, the heating section length, and the diameter. As an example, TW 43 x 24 x 1 is a Starbar 43" overall with a 24" hot zone, and 1" in diameter.
Hot Zone (Electrical Resistance)
Cold End (Electrical Resistance)
TW elements are available in diameters of 5/8" through 2-1/8". For minimum and maximum heated lengths and overall lengths please contact our office.
All Resistance values are +/- 20%.
I Squared R Element Co., Inc. 12600 Clarence Center Road, Akron, NY 14001
Ph: 716.542.5511 Fx: 716.542.2100 Email:
We make deliveries all over the world
Site created by
Thomas Web Solutions
and powered by